Getting Started
from Work \ Elevation Offsets \ Steer Offsets
Enter the <Front> or <Rear> steering offsets in the same way as the elevation offsets.
from Work \ Elevation Offsets \ Elevation Offsets
Enter the <Front> and or <Rear>, <Left> and or <Right> elevation offsets. Refer to
Entering offsets in the beginning of this chapter.
from Work \ Elevation Offsets \ Slope Offset
Enter the <Cross Slope> offset in the same way as the elevation offsets. The cross slope
offset determines catch / spill curb if there is no cross-slope information in the job. Only
available for machines using a cross slope sensor to control the slope.
PaveSmart 3D UM 48