Table of Contents
Advertisement
Contents of this
manual
How to use this Manual
These Actual position, elevation and slope values are compared to the computerised 3D
Design model of the project. The results of this Design-vs-Actual comparison, are called
Corrections. These corrections represent the amount of machine movement (in position,
elevation and slope) required to bring back the machine online and ongrade. Leica
PaveSmart 3D transmits these Corrections to the machine controller, which then regu-
lates the hydraulics, in a similar way to controlling with the conventional stringline sensors.
b
c
d
e
g
f
The Leica PaveSmart 3D User Manual is designed into four main sections. System setup
Information is presented in a step-by-step format:
1.Getting Started (Daily Operations, Project Setup, Hints and Tips)
2.System Components (Diagrams & Software Description)
3.Troubleshooting (Detailed Troubleshooting Chart)
4.Care and Transport/Safety Directions
a
h
i
k
j
a) MPC1310
b) CAD-PC
c) USB storage device
d) Project data
e) Reference point list
(OnBoard or hand-held application)
f) TCPS27S, TCPS29S or MCR-900 Radio
modem
g) Measured value Hz, V, Dist
h) Slope sensor(s)
i) Actual longslope & crossslope of the
machine
j) Machine
k) Parameters for position and height
PaveSmart 3D UM 7
Advertisement
Table of Contents
