Leica PaveSmart 3D User Manual page 2

Introduction
Introduction
Purchase
Product
identification
Congratulations on your purchase of the Leica PaveSmart 3D Machine Control System. Leica
PaveSmart 3D is the world's leading machine control system for increasing productivity in
paving and milling applications.
This manual contains important safety directions as well as instructions for setting up the
system and operating it. Refer to "6 Safety Directions" for further information.
Read carefully through the User Manual before you switch on the product.
To ensure safety when using the system, please observe the directions and instructions
contained in the User Manual and Safety Handbook issued by the:
• Machine manufacturer,
• Controller manufacturer and
• Sensor manufacturer.
The type and serial number of your product are indicated on the label on the base of the
product.
Enter the model and serial number in your manual and always refer to this information when
you contact your agency or Leica Geosystems authorised service workshop.
Type: MPC1310 Machine Computer
Type: MSS1200 Dual-Axis Slope Sensor
Type: TCPS27S/29S Ruggedised Radio Modem
Type: MCR-900 Ruggedised Radio Modem
(900MHz, North America only)
PaveSmart 3D UM 2
Serial number: _______________
Serial number: _______________
Serial number(s):_______________
Serial number: _______________