Responsibilities - Leica PaveSmart 3D User Manual

Safety Directions
6.4
Manufacturer of the
product
Manufacturers of non
Leica Geosystems
accessories
Person in charge of the
product
Warning

Responsibilities

Leica Geosystems AG, CH-9435 Heerbrugg, hereinafter referred to as Leica Geosystems, is
responsible for supplying the product, including the user manual and original accessories, in
a completely safe condition.
The manufacturers of non Leica Geosystems accessories for the product are responsible for
developing, implementing and communicating safety concepts for their products, and are
also responsible for the effectiveness of those safety concepts in combination with the
Leica Geosystems product.
The person in charge of the product has the following duties:
• To understand the safety instructions on the product and the instructions in the User
Manual.
• To be familiar with local safety regulations relating to accident prevention.
• To inform Leica Geosystems immediately if the equipment becomes unsafe.
• To ensure that the national laws, regulations and conditions for the operation of radio
transmitters are respected.
The person responsible for the product must ensure that it is used in accordance with the
instructions. This person is also accountable for the training and the deployment of
personnel who use the product and for the safety of the equipment in use.
This product may be installed on building machinery only by an appropriately trained and
qualified specialist.
Unauthorised modification of machines by mounting the product may alter the function and
safety of the machine.
Precautions:
Follow the instructions of the machine manufacturer. If no appropriate instruction is avail-
able, ask machine manufacturer for instructions before mounting the product.
PaveSmart 3D UM 112