Operating The Mpc1310 Machine Computer - Leica PaveSmart 3D User Manual

Getting Started
2.2
Starting the MPC1310
Warning

Operating the MPC1310 Machine Computer

The power key is on the upper right side of the MPC1310.
When power is supplied for the MPC1310, press the power key to start the MPC1310. After
pressing the key for 1 second, the power indicator LED will show green, and the MPC1310
will start booting-up.
Ensure that there is sufficient power supply. If not, switch on the ignition of machine or start
the engine.
ALWAYS disconnect the Machine PC power and/or CAN-cable to the machine before
conducting hot work/welding on the machine!
Reconnect the cabling only after completion of hot work/welding.
PaveSmart 3D UM 14
a
b
a) Power key
b) Power indicator LED