Getting Started
2.12
Creating a Backup
Backup and Restore
the Backup button is only active if PaveSmart 3D is in the Config level.
A PaveSmart 3D Backup contains all projects, all logfiles and all current software settings. It
can be used to re-establish a certain state on the machine computer for trouble shooting
purposes. The Backup is also very useful to check the current state for service purposes. For
example the user can send a Backup to a Leica service engineer to help troubleshoot a
problem.
NOTE: Leica strongly recommends a Backup be made at the end of each Production shift.
PaveSmart 3D UM 72