Table of Contents
Advertisement
Getting Started
h)
opens the Main Menu dialog to configure the Leica PaveSmart 3D software system
operation.
i)
opens the Tuning dialog to set the hydraulics parameters for the machine.
j)
press and hold for at least 1 second to stop Active Control and at least 3 seconds
to close the software and shut down the MPC1310.
Never power off the MPC1310 by holding down the Power Key! Always shut down the
MPC1310 by using the Exit button to ensure that all data are saved.
PaveSmart 3D UM 29
Advertisement
Table of Contents
