Troubleshooting - Leica PaveSmart 3D User Manual

Troubleshooting

4
Troubleshooting
Troubleshooting
Problem Possible cause(s)
Computer does Inadequate or missing power
not boot or start supply
up or keeps Power regulator failed
rebooting Reversed power supply polarity
Damaged Machine Computer
Damaged power cable
Leica PaveSmart Auto-Start is not enabled
3D does not start Configuration corrupted
Configuration is Configuration corrupted
lost or strange
behaviour of Leica
PaveSmart 3D
Robot fails to Communication parameters on
initialise instrument are not set correctly
Baud rate is not identical on
instrument and in the software
Radio modems have not the same
Link/baud rate configuration
• Low battery at instrument
PaveSmart 3D UM 100
Suggested remedies
Check machine power supply, fuses
and voltage regulator
Check connections to the MPC1310
Contact Leica Geosystems
Check all cables for damage
Restore Auto-Start link
Copy backup from USB storage
device
Restore back up in the Projects
menu
Choose appropriate Config Set
(TCRP RCS-RH1200 or TCRP RCS-
TCPS27)
Green LED's on a radio modem pair
need to be On
Configure radio modems to the
same Link/baud rate configuration
• Instrument is in a configuration
menu or in As-Built menu