Leica PaveSmart 3D User Manual page 43

Selecting Reference-
Line and SlopeLine
Getting Started
to choose a reference line, a slope line (or automatically chosen), and Screed Edge
lines (ScreedEdge lines are valid only for NaviTronic controllers).
change the Working Direction (with or against Stationing/Chainage). This is only
needed for a one-Robot or one-GPS solution.
leads to the Work \ Design \ Graphics dialog where some more graphical functions
such as 3D view are available.
The selection of the Reference Lines is either done automatically or manually.
• Automatically means the system is determining automatically the next reference line on
the left- and the right side of the machine (or its height control point) to calculate the
design height- and slope.
• Manually you chose the ReferenceLine and optional a SlopeLine. When using the Road
Paver profile this can be disabled in Menu \ Preferences \ General <Disable Automatic Line
Selection>. When using the screed extension control with the Vögele NaviTronic
controller, the procedure asks for the Edge Line definition after the steering line has
been chosen.
Milling, Curb&Gutter, Mainline Paver and Trimmer: Line selection is always made manu-
ally, automatic line selection is not available.
Road Paver: Automatic line selection is by default disabled. By enabling, PaveSmart 3D
automatically determines the relevant ReferenceLines.
PaveSmart 3D UM 43