Table of Contents
Advertisement
Getting Started
The Menu dialog offers several opportunities to configure the Leica PaveSmart 3D software.
The machine and the current task have an influence on the configuration required.
contains all project and job relevant dialogs to manage jobs, log files, as-built
recordings and backups.
Define sensor configuration (Robot, Robot+GPS etc.) is being used and to
configure all attached sensors.
General settings such as units, language, date/time etc.
To define machine profile, machine dimensions, control points, interval/periodic
actions, locks and stops, production tolerances and advanced machine tuning
options.
Diagnostic tools for data flow and the external radio configuration tools.
Unlock the protected dialogs (if disabled) - opens a dialog to enter the password.
Contains various tools for experienced service personnel only. Customer access
only under Leica supervision.
See the Technical Reference Manuals for detailed information as dialog may be
different depending on selected machine profile.
PaveSmart 3D UM 16
Advertisement
Table of Contents
