Technical Data - Leica PaveSmart 3D User Manual

Technical Data

7
Leica PaveSmart 3D
Technical Data
Parameter
Elevation accuracy* of machine position 5 - 10 mm (approx. 0.02') / 200m (600 ft)
Position accuracy* of machine
GNSS Position, Elevation and Heading
accuracy* of machine
Maximum Range (recommended)
Measuring frequency
Supply voltage
Supply Current (max, at 24V DC)
* Standard deviation; depends on the condition the machine is in, the paving material, the
paving distance, accuracy of reference points (fixpoints), atmospheric influences and the
chosen sensor option:
• For s line of sight interruptions, severe heat shimmer and moving objects within
robot
the line of sight path can result in deviations of the specified accuracy.
• For GPS sensors, the accuracy is dependent upon various factors including the number
of satellites tracked, constellation geometry, observation time, ephemeris accuracy,
ionospheric disturbance, multipath and resolved ambiguities. A coordinate transfor-
mation must be carried out to link the local coordinate system with the WGS 84 GNSS
coordinate system prior to any paving works being carried out. The transformation
must be verified before paving begins and the control points used, must surround the
extents of the area to be paved.
Refer to the Leica PaveSmart 3D and GPS technical reference manuals for more infor-
mation, and details on limitations and precautions which should be taken prior to
paving.
Data
5 - 10 mm (approx. 0.02' - 0.03') / 200 m (600 ft)
10-25mm (depending on GNSS and slope condi-
tions)
± 200 m (600 ft)
10 Hz
12 VDC or 24 VDC
3 A
PaveSmart 3D UM 134