Table of Contents
Advertisement
Getting Started
g)
opens the Offset dialog to set the working offsets relative to the selected
Reference Line and Slope Line.
h)
opens the Main Menu dialog to configure Leica PaveSmart 3D settings, such as
Machine, Project, Sensors etc.
i)
opens the Tuning dialog to adjust the hydraulics sensitivity for the machine's eleva-
tion and steer (where applicable) control.
j)
press and hold for at least 1 second to stop active Control and for at least 2 seconds
to close the software and shut down the MPC1310.
Never power off the MPC1310 by holding down the Power Key! Always shut down the
MPC1310 by using the Exit button to ensure that all data and system settings are saved.
PaveSmart 3D UM 32
Advertisement
Table of Contents
