Pre-Season Service - BRP EVINRUDE E-TEC 115 HP 2011 Service Manual

PRE-SEASON SERVICE

If the outboard was removed from the boat for
storage, make sure it is reinstalled with factory
specified hardware. Refer to the Predelivery and
Installation Guide.
Outboard Mounting Bolts
•
Check and re-tighten outboard mounting bolts
to a torque of 40 ft. lbs. (54 N·m).
Gearcase Lubricant
•
Check the lubricant level.
•
Inspect gearcase for leaks. If leak is apparent,
pressure and vacuum test gearcase.
•
Repair gearcase as needed.
Battery(s)
•
Replace batteries that cannot be charged.
Power Trim and Tilt
•
Remove filler cap and check fluid level.
•
Inspect the power trim and tilt unit for leaks.
Repair as needed.
PRE-SEASON SERVICE
Operational Checks
•
Refer to OPERATIONAL CHECKS on p. 31
•
Steering system
•
Remote controls
•
All other accessories and instrumentation
Check Oil Injection Tank
•
Inspect the oil tank for leaks.
Check Fuel System
•
Inspect entire fuel system for leaks before start-
ing outboard.
•
Repair all leaks.
Water Pump
•
Make sure a steady stream of water flows from
overboard indicator.
WARNING
Failure to check for fuel leakage could
allow a leak to go undetected, resulting in
fire or explosion.
ROUTINE SERVICE
45
2