Shift Rod Adjustment - BRP EVINRUDE E-TEC 115 HP 2011 Service Manual

GEARCASE

SHIFT ROD ADJUSTMENT

SHIFT ROD
ADJUSTMENT
Check the shift rod height from the shift rod hole to
the surface of the gearcase using Universal Shift
Rod Height Gauge, P/N 389997.
274
With the gearcase in NEUTRAL, rotate the shift
rod up or down as necessary for correct adjust-
ment. Once correct height is achieved, rotate rod
one half turn or less to direct offset forward.
IMPORTANT:
step design. Make sure the NEUTRAL detent ball
is in the center step before checking shift rod
height.
Shift Rod Heights
Model
20 in. (L)
25 in. (X)
COA6166
The NEUTRAL detent is a two-
Type Height
"S2" 20 15/16 in.
"L2" (20.945 in./ 532 mm)
"O" ± 1/2 Half Turn
25 15/16 in.
"O"
(25.945 in./ 659 mm)
"M2"
± 1/2 Turn