Exhaust Housing Service; Exhaust Housing Removal; Lower Mount Service - BRP EVINRUDE E-TEC 115 HP 2011 Service Manual

MIDSECTION

EXHAUST HOUSING SERVICE

EXHAUST HOUSING
SERVICE

Exhaust Housing Removal

Before removing the exhaust housing:
•
Remove the gearcase. Refer to Gearcase
GEARCASE REMOVAL AND INSTALLATION
on p. 268.
•
Remove the powerhead. Refer to POWER-
HEAD REMOVAL on p. 196.
Remove and discard four lower mount screws.
20" Models
"
25" Models
"
242
Remove the exhaust housing.

Lower Mount Service

Remove lower mount covers and inspect the
lower mounts.
If replacement is necessary, lubricate mount with
23036
soapy water and carefully pry at both ends to
remove.
32590
007178
32578