Table of Contents
Advertisement
GEARCASE – COUNTER ROTATION
GEARCASE DISASSEMBLY
DO NOT use tools designed to push on the pro-
peller shaft. Pushing against the propeller shaft
could damage the forward gear thrust bearing or
thrust washer.
Install the threaded adaptor from the puller kit on
to the propeller shaft until seated.
Assemble puller kit components. Hold adaptor
with wrench and turn nut clockwise to pull bearing
housing.
308
Pull propeller shaft and bearing housing far
enough to loosen the PRESSED bearing housing
from the gearcase housing.
"M2" Type Gearcase
Remove propeller shaft, forward gear and bearing
housing assembly from gearcase.
006833
Pinion Gear Removal and
Driveshaft Servicing
Refer to Pinion Gear and Driveshaft Removal –
006834
"O", "L2", and "M2" Type on p. 281.
006837
006850
Advertisement
Chapters
Table of Contents
Troubleshooting
