Oetiker Clamp Servicing - BRP EVINRUDE E-TEC 115 HP 2011 Service Manual

OETIKER CLAMP
SERVICING
Clamp Identification
Use Oetiker clamps for making hose connections.
These clamps provide corrosion resistance, mini-
mize the potential for abrasion of rigging compo-
nents, and provide solid, permanent connections.
The selection and installation of an Oetiker clamp
is essential in the proper sealing of hose connec-
tions. The clamp identification numbers appear on
the side of the clamp, near the top of the ear.
Refer to Clamp Selection chart for dimensions.
WARNING
DO NOT re-use Oetiker clamps. Fuel leak-
age could contribute to a fire or explosion.
Clamp Selection
To select the correct size Oetiker clamp, measure
the outside diameter of the hose when installed on
the fitting.

OETIKER CLAMP SERVICING

1
1. Clamp identification numbers
Chose a clamp so that the outside diameter of the
hose is approximately in the middle of the clamp-
ing range of the clamp.
ROUTINE SERVICE
000093
008458
25
2