Exhaust Housing Disassembly - V6 Models; Exhaust Housing Disassembly - V4 Models - BRP EVINRUDE E-TEC 115 HP 2011 Service Manual

MIDSECTION
EXHAUST HOUSING SERVICE
Exhaust Housing Disassembly –
V6 Models
Remove the front and rear screws retaining the
adapter/inner exhaust housing to the exhaust
housing.
1
1. Adapter retaining screws
Lift the adapter/inner exhaust housing out of the
exhaust housing.
Remove the water tube. Inspect water tube grom-
met and replace if necessary.
1
1. Water tube grommet
244
Exhaust Housing Disassembly –
V4 Models
Remove three screws and exhaust valve actuator.
1
1
1. Actuator screws
Remove collar only if replacing exhaust housing.
005205
Loosen collar screw. Remove collar.
1
1. Screw
2. Collar
005207
IMPORTANT:
they are not serviceable.
005210
Do NOT remove exhaust valves
1
007182
2
007185