Stern Bracket Assembly - BRP EVINRUDE E-TEC 115 HP 2011 Service Manual

Stern Bracket Assembly

IMPORTANT:
Before proceeding, make sure all
components have been thoroughly cleaned.
Replace any seals that have been removed.
Inspect all thrust washers and bushings for evi-
dence of deterioration.
Install the detent roller and spring and the tilt sup-
port with bushing in the swivel bracket. Tighten
bushing to a torque of 28 to 30 ft. lbs. (38 to 41
N·m).
1. Tilt support bushing
Install the two trim rod rollers on the swivel
bracket. Tighten to a torque of 216 to 240 in. lbs.
(25 to 27 N·m).
1
1. Trim rod roller
Install the trail lock and bushings in the swivel
bracket. Tighten to a torque of 216 to 240 in. lbs.
(25 to 27 N·m).
30752
1
1. Trail lock bushing
Install the trail lock spring in the swivel bracket
and connect the spring to the trail lock.
30753
2
1. Trail lock spring
2. Trail arm retainer
MIDSECTION
STERN BRACKET
30754
1
30755
11
1
30756
251