Loading And Emptying With A Tray Rack Trolley - Henny Penny FlexFusion FGG-615 Operating Manual

Operating the unit

5.4.2 Loading and emptying with a tray rack trolley

Prerequisite Remove support racks and place guide rails on pins
30
4. Leave the cooking chamber door slightly ajar.
This extends the service life of the door seal.
No moisture builds up in the cooking chamber.
g
f
e
Image: Loading and emptying with a tray rack trolley
a Tray rack
b Handle bar
c Lever
d Locking casters
Loading with a tray rack trolley
Food-containing trays resting securely on the tray rack
1. Open cooking chamber door.
2. Rotate the lever on the tray rack trolley.
The tray rack is secured to prevent its rolling down.
Check that the tray rack is locked in place by pulling on it
slightly.
3. Load the tray rack.
4. Position the tray rack trolley at the unit.
Lock the casters to prevent the trolley's rolling away.
5. Rotate the lever.
The tray rack is now free to move.
6. Insert the tray rack completely until the rollers rest in the openings
in the guide rail.
7. Retract the tray rack support plate and secure in place with the
lever.
8. Move the tray rack trolley away from the unit.
9. Close the cooking chamber door.
10.Start the cooking process.
Operating instructions
a
b
c
d
e Tray rack trolley
f Tray rack support plate
g Guide rail