Inserting The Cleaning Cartridge - Henny Penny FlexFusion FGG-615 Operating Manual

6.10.3 Inserting the cleaning cartridge

INFORMATION
INFORMATION
INFORMATION
3. Press the "START STOP" button.
If the cooking chamber temperature is too high, "HOt" appears
on the right display; if the cooking chamber temperature is too
low, "--:--" appears on the right display.
The indicator light for the Ready2Cook button flashes.
Once the cleaning temperature is reached, a signal sounds.
The center display shows the cleaning level.
"CAr" appears on the right display.
Use only cleaning cartridges with an undamaged wax seal.
If the wax seal is damaged, the cleaner can enter the cleaning circuit prema-
turely or not dissolve completely, so that complete cleaning is no longer as-
sured.
Insert the cleaning cartridges only when requested to do so.
Never operate the unit in the automatic cleaning mode without a cleaning car-
tridge.
If there is a high level of contamination, select the "CL3" cleaning level and
use 2 cleaning cartridges.
Cartridge holders are located on the air diverter, the tray trolley and the pre-
heat bridge.
Image: Wax seal on the cleaning cartridge damaged
A
Image: A: Insert cartridge into spring holder; B: Insert cartridge into holder
Operating instructions
Cleaning and caring for the unit
B
53