6 Cleaning And Caring For The Unit; Preventing Corrosion; Removing Rust Spots - Henny Penny FlexFusion FGG-615 Operating Manual

6 Cleaning and caring for the unit
CAUTION
CAUTION
NOTICE
NOTICE

6.1 Preventing corrosion

6.2 Removing rust spots

Risk of burns from hot surfaces
• Allow surfaces to cool prior to cleaning.
Risk of chemical burns from cleaning agent
• Follow the instructions of the cleaning agent manufacturer.
• Take appropriate protective measures when handling aggressive cleaning
agents.
Risk of property damage from extremely abrupt cooling
• Do not shock the unit by cooling it abruptly.
Risk of property damage from improper cleaning
• Do not clean the unit with a high-pressure cleaner or water jet.
• Keep the surfaces of the unit clean, with access to air.
• Remove lime, grease, starch and protein deposits from the unit's
surfaces.
• Remove salt accumulations.
• Expose parts made from non-rusting steel only briefly to contact
with highly acidic foods, spices, salts or the like.
• Avoid damaging the stainless steel surface with other metal items,
for instance, steel spatulas or steel wire brushes.
• Prevent contact with iron and steel, for instance, steel wool and
steel spatulas.
• Do not use bleaching or chlorine-containing cleaning agents.
• Clean contact surfaces with water.
• Remove fresh rust spots with a mild abrasive or fine sandpaper.
• Always remove rust spots completely.
• Expose treated areas to fresh air for at least 24 hours. During this
time, do not allow any contact with greases, oils or foods so that a
new protective layer can form.
Operating instructions
Cleaning and caring for the unit
47