Inspecting The Unit; Performing A Visual Inspection - Henny Penny FlexFusion FGG-615 Operating Manual

Cleaning and caring for the unit

6.13 Inspecting the unit

6.13.1 Performing a visual inspection

NOTICE
Prerequisite Unit disconnected from the electric supply mains
58
4. Loosen the center fastener; present only in size 20.
5. Swing the air diverter toward the back wall.
Swinging back the air diverter
1. Swing back the air diverter along the side wall.
2. Close the upper fastener.
3. Close the lower fastener.
4. Close the center fastener; present only in size 20.
5. Check the fasteners.
6. Insert the left support rack; present only in size 6 and size 10.
Risk of property damage from improper inspection
• Inspect in accordance with the inspection intervals.
• Have inspections performed by a capable user.
• In the event of damage or signs of wear, contact customer service immedi-
ately and stop using the unit.
Unit empty and cleaned
Cooking chamber door opened completely
Inspect housing, cooking chamber door and cooking chamber
yearly for deformation and damage.
Visual inspection has been performed.
Operating instructions