Symbols On The Instrument - HBM DMP41 Operating Manual

2

Symbols on the instrument

DMP41
Attention
It is essential to take account of the instructions in the operating manual.
CE mark
The CE mark enables the manufacturer to guarantee that the product
complies with the requirements of the relevant EC directives (the
Declaration of Conformity can be found on the HBM website
(www.hbm.com) under HBMdoc).
Statutory waste disposal mark
The electrical and electronic devices that bear this symbol are subject to the
European waste electrical and electronic equipment directive 2012/19/EU.
The symbol indicates that the DMP41 must not be disposed of as household
garbage. In accordance with national and local environmental protection
and material recovery and recycling regulations, old equipment that can no
longer be used must be disposed of separately and not with normal
household garbage.
All electrical and electronic products must be disposed of as hazardous
waste. The correct disposal of old equipment prevents ecological damage
and health hazards.
If you need more information about disposal, please contact your local
authorities or the dealer from whom you purchased the product.
As waste disposal regulations within the EU may differ from country to
country, we ask that you contact your supplier as necessary.
Environmental protection
20
The product will comply with general hazardous substances limits for at
least 20 years, and will be ecologically safe to use during this period, as well
as recyclable.
Statutory mark of compliance with emission limits in electronic equipment
supplied to China.
A03470_07_E00_00 HBM: public
Symbols on the instrument
13