Table of Contents
Advertisement
1
Safety instructions
DMP41
Intended use
The DMP41 precision measuring instrument (referred to as the DMP41 in
the following document) is to be used exclusively for measurement tasks
and directly related control tasks. Use for any purpose other than the above
is deemed to be non-designated use.
In the interests of safety, the DMP41 should only be operated as described
in the operating manual. It is also essential to comply with the legal and
safety requirements for the relevant application during use. The same
applies to the use of accessories.
General dangers of failing to follow the safety instructions
The DMP41 is state of the art and failsafe. The DMP41 may give rise to
residual dangers if it is inappropriately installed and operated by untrained
personnel.
Any person instructed to carry out installation, startup, maintenance or re
pair of the DMP41 must have read and understood the operating manual
and in particular the technical safety instructions.
Conditions at the place of installation
S Protect the DMP41 from direct contact with water.
S Protect the DMP41 from moisture or weather conditions such as rain,
snow, etc. The protection class under the IP standard DIN EN 60 529, is
IP20.
S Do not expose the DMP41 to direct sunlight.
S Keep all ventilation slots open to ensure unhindered air flow.
S For installation in 19" electrical enclosures, due to poorer heat
dissipation, measures must be taken to ensure that the maximum
permitted ambient temperature (+50°C) is not exceeded. We recommend
forced venting in any case and in especially critical cases, intermediate
spaces between the upper and lower rack frames.
S Please comply with the maximum permitted ambient temperatures
è
(
see Technical Data sheet). Do not operate the DMP41 when the
ambient temperature is below +5°C or over +50°C.
A03470_07_E00_00 HBM: public
Safety instructions
7
Advertisement
Table of Contents
