Table of Contents
Advertisement
DMP41
7.2.3
Zeroing and taring (Zero/Tare)
Zeroing and taring using the quick configuration bar in measuring
mode
Selected channels are set to zero or tared with Zero or Tare, i.e. the
currently measured zero value or tare value is applied (in mV/V).
Quick configuration bar
Zeroing and taring using an edit field in setting mode
Edit fields for the zero value and the tare value:
S Zero value
S Tare value
1
Applies the adjacent electrical value as the zero value
2
Applies the adjacent electrical value as the tare value
3
Applies the adjacent (scaled) physical value as the zero value
4
Any unit (set in Scaling)
A03470_07_E00_00 HBM: public
Configuring measurement channels in setting mode
1
2
3
4
Configuration
69
Advertisement
Table of Contents
