Table of Contents
Advertisement
Configuration
Typical configuration example
Display configuration
F1
► Use shift key F1 to select measuring mode.
► Select the measured value display to be edited (set checkmark).
► Press Menu(F4).
► Press Signal and select the signal type Net (A).
► Press Unit and select the required unit (here: User = kg in the display) (B)
► Place the container on the scale.
Measuring mode
► Press Tare to zero (C).
► Pour the bulk material into the container.
The weight of the bulk material is displayed.
F4
B
A
C
DMP41
99
A03470_07_E00_00 HBM: public
Advertisement
Table of Contents
