Configuration
Characters per line
90
7.3.9
Logging
The properties of the log file can be defined for troubleshooting (e.g. com
munication errors between the DMP41 and the PC).
The log file is only of interest when the DMP41 is not working as expected.
You can then specify which events should be recorded in the log and you
can transfer the log file to a USB flash drive.
The file can then provide HBM Support with indications about the cause of
the problem. Ask Support which options should be activated in your case.
HBM Support
Telephone support is available on all working days from 09:00 to 12:00 and
from 13:00 to 16:00 (CET):
06151 803-0 (within Germany)
+49 6151 803-0 (international)
In addition, you can contact HBM Support by e-mail: support@hbm.com
Information
The "Logging" function is only available for operation via the DMP41 (not for
operation via PC).
► Press more....
► Press Logging.
You can specify the log file properties and choose which errors are written
to the log file:
Maximum file size :
Maximum line length :
Errors :
Control :
DMP:
TCP :
Copy logfile to USB :
A03470_07_E00_00 HBM: public
Size of the log file
Line length in the log file
Error logging ON/OFF
Setup dialog logging
Logging internal DMP41 communication
Logging communication with PC operating
software (DMP41 Client)
Saves the log file to a USB flash drive
DMP41