Table of Contents
Advertisement
Configuration
Configuring measurement channels in setting mode
7.2.7
Configuring the measured value display (Resolution/Step)
The settings in the Resolution menu influence what is shown in the display.
Setting the display accuracy (Resolution)
You can use the display accuracy to specify the number of digits after the
decimal point.
Example: Full scale value of display 20 kg
Resolution 0.0 (20.0 kg)
Resolution 0.000 (20.000 kg)
Setting the increment (Step)
You can specify the display increments with the step value. The step value
refers to the last digit.
Example: Full scale value of display 20 kg
Decimal places (Resolution) 1 (20.0 kg)
Step 1 means display increments of 100 g
Step 5 means display increments of 500 g
Step 100 means display increments of 10,000 g
Decimal places (Resolution) 3 (20.000 kg)
Step 1 means display increments of 1 g
Step 5 means display increments of 5 g
Step 100 means display increments of 100 g
► Press more....
► Press Resolution.
► Select the channel to be set.
► Enter the increment (Step) for the user-defined unit.
► Enter the resolution for the user-defined unit.
► Enter the increment (Step) for mV/V.
► Enter the resolution for mV/V.
DMP41
75
A03470_07_E00_00 HBM: public
Advertisement
Table of Contents
