Table of Contents
Advertisement
A
The channel settings saved in parameter
set number 9 are written over to channel
2 only.
DMP41
Loading (Load)
► Press more....
► Press Load.
► Select the parameter set number (here: 9).
► Choose the channels to be overwritten with the settings of the selected
parameter set.
Here:
The channel settings stored in parameter set 9 are written over to
channel 3 (A).
► Confirm with Load (B).
The channels affected by the changes are identified by a green checkmark.
B
A03470_07_E00_00 HBM: public
Configuring measurement channels in setting mode
Configuration
77
Advertisement
Table of Contents
