Ug Graphics Information Inquiry - Intermec EasyCoder C4 Programmer's Manual

UG – Graphics Information Inquiry
Description
Syntax
Remarks
Example
Intermec EasyCoder C4 – Programmer's Guide Ed. 3
This command will cause the printer to send information about graphics currently
stored in the printer back to the host.
UG
The printer will send the number of graphics and the name of each graphic to the
host through the serial RS-232 port.
The UG command will be executed directly, without appending any Linefeed.
:Returns number of graphics and all graphic names, for example:
UG
UG001
LOGO
Chapter 7 Commands
85