Or Character Substitution - Intermec EasyCoder C4 Programmer's Manual

oR – Character Substitution
Description
Syntax
Parameters
Remarks
Examples
Intermec EasyCoder C4 – Programmer's Guide Ed. 3
This command allows the advanced programmer to substitute the Euro currency
character (€) for any ASCII character in printer-resident fonts 1-5. The original
character can be restored by sending the oR command.
oR[p [,p ]]
1 2
p If p1 = E, the Euro character will be mapped to the code page position
1
specifi ed by p
If no p
1
default character mapping.
p Specifi es the code page position for the Euro character in the range ASCII
2
32-255 decimal for all code pages, provided p
If p2 is omitted, the Euro character will be mapped to the code page position
ASCII 213 decimal for all code pages, provided p
The oR command is a global printer command.
• It cannot be issued inside a form.
• It must be issued prior to issuing a text command and printing it.
• It affects a single character on all code pages. Changing the character position
will restore the original character.
• Flash memory printer parameter data are preserved until they are changed by
the oR command or the printer is reset to default.
oRE
oRE,128
oR
.
2
or p parameters are given, all code pages will be reset to original
2
:Places the Euro character in position ASCII 213 dec.
:Places the Euro character in position ASCII 128 dec.
Chapter 7 Commands
= E.
1
= E.
1
:Clears character substitution and
restores default character maps
72