Uf Form Information Inquiry - Intermec EasyCoder C4 Programmer's Manual

UF – Form Information Inquiry
Description
Syntax
Remarks
Example
Intermec EasyCoder C4 – Programmer's Guide Ed. 3
This command will cause the printer to send information about forms currently
stored in the printer back to the host.
UF
The printer will send the number of forms stored and the name of each form to the
host through the serial RS-232 port.
The UF command will be executed directly, without appending any Linefeed.
:Returns number of forms and all form names, for example:
UF
UF006
TEST1
TEST2
TEST3
TEST4
TEST5
TEST6
Chapter 7 Commands
84