Ug Graphics Information Inquiry - Intermec EasyCoder C4 Reference Manual

UG – Graphics Information Inquiry
This command will cause the printer to send information about
Description
graphics currently stored in the printer back to the host.
Syntax
UG
The printer will send the number of graphics and the name of
Remarks
each graphic to the host through the RS-232 or USB port.
The UG command will be executed directly, without appending
any Linefeed.
Example
UG
UG001
LOGO
Intermec EasyCoder ESim v4.00—Programmer's Reference Manual
Chapter 7—Commands
:Returns number of graphics and
all graphic names, for example:
101