Print Direction - Intermec EasyCoder C4 Programmer's Manual

Z – Print Direction
Description
Syntax
Parameters
Remarks
Example
Intermec EasyCoder C4 – Programmer's Guide Ed. 3
This command is used to select the print orientation.
Zp
1
p Print orientation:
1
T Start printing from the top of image buffer (default).
B Start printing from the bottom of image buffer.
This command affects the complete print image, including text, bar codes,
graphics, lines, and boxes, as well as the location of the reference point (see
R command).
Note that printing a test label in the Test Mode, or by means of a
will reset the print direction to default (= ZT).
ZT Command:
ZB Command:
EASYCODER C4
ZB
C4 EASYCODER
Feed Direction
Feed Direction
:Starts printing from the bottom of the image buffer
Chapter 7 Commands
U or UP command,
97