Downloading Fonts And Graphics - Intermec UVE 10 PB21 User Manual

Chapter 2 — Configuring the PB21 and PB31
7 Type this command:
8 Type this command:
9 In the communications program window, click Transfer > Send
10 In the protocol drop-down box, select Zmodem.
11 Browse to the firmware (.bin) upgrade file and select it.

Downloading Fonts and Graphics

The easiest way to download fonts and graphics is to use PrintSet. You
can download PrintSet from the downloads page for the printer on
the Intermec website at www.intermec.com. Follow the procedures
in the PrintSet online help to download fonts and graphics.
For help with Fingerprint, IPL, ESC/P, or SmartSystems commands
and information, see either the
Reference
ESC/P Programmer's Reference Manua
help. You can download these documents from the Intermec website
at www.intermec.com.
44
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
su -pass admin.
dlk -z.
The printer indicates that it is "Upgrading."
File. A dialog box appears.
Wait approximately 5 minutes for the firmware upgrade to finish.
When the upgrade is complete, the communications program
displays the message, "kernal flashing ok." The printer
automatically reboots.
Manual, the Intermec Fingerprint Developer's
V10 CONSUMIBLES S.L.
Intermec Fingerprint Command
, or SmartSystems online
l
PB21 and PB31 Mobile Receipt Printer User Guide
Guide, the