A Print Text - Intermec EasyCoder C4 Programmer's Manual

A – Print Text
Description
Syntax
Parameters
Intermec EasyCoder C4 – Programmer's Guide Ed. 3
This command is used to print an ASCII text string.
Ap ,p ,p ,p ,p
1 2 3 4 5
p Horizontal start position (X) in dots.
1
p Vertical start position (Y) in dots.
2
p 0 No Rotation. Left to right.
3
1 90 degrees rotation. Left to right
2 180 degrees rotation. Left to right
3 270 degrees rotation. Left to right
4 No Rotation. Top to bottom. Asian fonts (p
5 90 degrees rotation. Top to bottom. Asian fonts (p
6 180 degrees rotation. Top to bottom. Asian fonts (p
7 270 degrees rotation. Top to bottom. Asian fonts (p
p Font selection:
4
1 20.3 cpi, 6 points
2 16.9 cpi, 7 points
3 14.5 cpi, 10 points
4 12.7 cpi, 12 points
5 5.6 cpi, 24 points
8 Asian fonts
- Korean
- Chinese GB
- Chinese BIG-5
- Japanese
a–z Soft Fonts
p Horizontal multiplier 1, 2, 3, 4, 6, 8.
5
(Magnifi es the text horizontally).
p Vertical multiplier 1, 2, 3, 4, 5, 6, 7, 8, 9.
6
(Magnifi es the text vertically).
p N Normal image
7
R Reverse image
"DATA" Represents a fi xed data fi eld.
When using Asian double-byte fonts, specify both bytes as ASCII decimal
values, starting with the fi rst value being larger than ASCII 127 dec (ASCII
7F hex).
,p ,p ,"DATA"
6 7
Chapter 7 Commands
=8) only
4
=8) only
4
=8) only
4
=8) only
4
(8 x 12 dots)
(10 x 16 dots)
(12 x 20 dots)
(14 x 24 dots)
(32 x 48 dots)
(24 x 24 dots) one of the following:
Korean.24
GB.24
Big5.24
Japanese.24
24