Speed Select - Intermec EasyCoder C4 Programmer's Manual

S – Speed Select
Description
Syntax
Parameters
Remarks
Example
Intermec EasyCoder C4 – Programmer's Guide Ed. 3
This command is used to select the label speed while printing.
Sp
1
p Speed select value:
1
0 30 mm/sec. (1.2 inches/sec.)
1 40 mm/sec. (1.6 inches/sec.)
2 50 mm/sec. (2 inches/sec.)
3 75 mm/sec. (3 inches/sec.)
Changing the print speed will affect the blackness of the printout, which may have
to be adjusted by means of a
S2
D command.
:Sets the print speed to 50 mm/sec. (2 inches/sec.).
Chapter 7 Commands
81