Up Code Page & Memory Inquiry/Print - Intermec EasyCoder C4 Programmer's Manual

UP – Code Page & Memory Inquiry/Print
Description
Syntax
Parameters
Example
Also see
Intermec EasyCoder C4 – Programmer's Guide Ed. 3
This command will cause the printer to print and send the currently selected code
page and memory status to the host through the serial RS-232 port.
UP
The printer will:
• Send information on the currently selected code page and memory status back
to the host (same as
• Print the current printer confi guration (same as
The format of the data sent to the host is as follows:
UM p ,p ,p ,p ,p
1 2 3 4
p Image buffer size in kilobytes.
1
p Form memory allocation size in kilobytes.
2
p Form memory free in kilobytes.
3
p Graphic memory allocation size in kilobytes.
4
p Graphic memory free in kilobytes.
5
p External font memory allocation size in kilobytes.
6
p External font memory free in kilobytes.
7
p Number of data bits.
8
p Code page.
9
p Country code.
10
UP
I, M, U, UI, and UM
UM command).
,p ,p ,UI p ,p
5 6 7 8
:Returns memory status and current code page
commands.
Chapter 7 Commands
U command).
,p
9 10
and prints confi guration on label.
89