Print - Intermec EasyCoder C4 Programmer's Manual

P – Print
Description
Syntax
Parameters
Remarks
Examples
Intermec EasyCoder C4 – Programmer's Guide Ed. 3
This command is used to print the contents of the image buffer.
Pp [,p ]
1 2
p Numbers of label sets (1-65535).
1
p Number of copies of each label (1-65535). Used in combination with counters
2
to print multiple copies of the same label.
Important!
The P command cannot be used inside a stored form sequence. For automatic
printing of stored forms, use the
P
P1
P2,1
P5,2
The principles for how counters are printed is illustrated by this example,
where the print command is P2,2:
Counter: 1
Counter: 1
Counter: 2
Counter: 2
PA command.
:Prints two label sets of one label each
:Prints fi ve label sets of two labels each
Label No. 1
Label No. 2
Label No. 3
Label No. 4
Chapter 7 Commands
:Prints one label set
:Prints one label set
73