Commands List Direct Mode - Intermec EasyCoder C4 Programmer's Manual

Commands List
Direct Mode
Intermec EasyCoder C4 – Programmer's Guide Ed. 3
The following list illustrates which commands can be used in the
Direct Mode and the Form Edit Mode and for what purposes.
• Setup Commands
Used to set up the printer globally, that is affect both the Direct
Mode and Forms:
D Density
I Character Set Selection
JB Disable Top of Form Backup
JF Enable Top of Form Backup
j Media Feed Adjustment
M Memory Allocation
O Options Select
oR Character Substitution
Q Set Form Length
q Set Label Width
R Set Reference Point
S Speed Select
UN Disable Error Reporting
US Enable Error Reporting
W Windows Mode
Y Serial Port Setup
Z Print Direction
• Store Commands
Used to store graphic fi les:
GM Store Graphics in Memory
GW Store Graphics in Image Buffer
Used to store soft fonts:
ES Store Soft Font
• Clear and Delete Commands
Used to erase data from the printer's memory:
EK Delete Soft Font
FK Delete Form
GK Delete Graphics
N Clear Image Buffer
Chapter 2
9 9