Select Half-Speed Printing; Cancel Half-Speed Printing; Set Inactivity Time For Sleep Mode; Line Feed - Intermec 6820 Series User Manual

—
Chapter 5 Control Code Definitions
66

Select Half-Speed Printing

Half-speed mode is turned on to provide quiet printing, and more accurate
print positioning during text mode printing.
Format
Decimal
27 115 1*

Cancel Half-Speed Printing

Half-speed mode is turned off (factory default), and continues with normal
speed printing.
Format
Decimal
27 115 0*

Set Inactivity Time for Sleep Mode

The time period, for which the printer waits during inactivity before it
goes into low-power mode, is set (in n seconds). The factory default is 10
seconds.
Format
Decimal
27 122 n

Line Feed

Perform Line Feed
The contents of the print buffer is printed, then cleared, and the character
count is reset to zero; then the print head advances to the next print line,
using the current spacing. The position of the carriage is not affected and a
carriage return is not executed.
Format
Decimal
10
Perform n/216-inch Line Feed
The paper to immediately advanced n/216 of an inch. This does not affect
subsequent line feeds. Range of n is 0–255.
Format
Decimal
27 74 n
Hex
1B 73 01*
Hex
1B 73 00*
Hex
1B 7A n
Hex
0A
Hex
1B 4A n
6820 Series 80-Column Printer User's Manual
ASCII
ESC "s" 1*
ASCII
ESC "s" 0*
ASCII
ESC "z" n
ASCII
LF
ASCII
ESC "J" n