Intermec 6820 Series User Manual page 167

6820 Series 80-Column Printer User's Manual
The settings in the previous table are installed in the printer at the factory.
To restore the printer to these defaults, see page 10 for instructions.
The default settings listed below can be restored to the printer, as described
in Chapter 4, "Using the Configuration Utility."
Function
Zero print option
Autofeed configuration
Protocol
Parity
Bit Rate
Appendix
Default Value
Zeros are printed with a slash
CR (carriage return added at end of line without line feed)
NPCP (NORAND Portable Communications Protocol)
N/A (for NPCP)
19.2K
—
B Cross-Reference Tables
151