Check List - Intermec 6820 Series User Manual

—
Chapter 2 Operation

Check List

14
Make sure the following tasks are done:
S Printer is unpacked.
S Foam blocks are removed from around the printer. Save the box and
packaging materials for future use, such as servicing, relocations, etc.
S Twist tie is removed from the print head.
S Power cable is hooked up to the vehicle battery or power source.
S Printer is mounted in the vehicle.
The following tasks must be done. Specific instructions for these tasks are
described on the pages given:
1 Connect the battery (page 15).
2 Install the ribbon cartridge (page 16).
3 Load the paper into the paper tray (page 18) and into the printer (sever-
al steps starting on page 20).
4 Insert the mobile computer (page 23).
Note: Complete these tasks before starting any printer operations.
6820 Series 80-Column Printer User's Manual