Save Defaults To Printer - Intermec 6820 Series User Manual

—
Chapter 4 Using the 6820 Printer Configuration Utility
Click Yes to repeat the previous steps above (starting with Attempting a
Connection to the Printer), else click No. An error message (as shown be-
low) is displayed informing you that the configuration was not saved.
Click No to return to the Main Menu without updating the printer.
Connection Successful
If the connection is successful, the following screen is displayed, the Send
to Printer function is initiated, and the printer's configuration is updated
to match the working configuration.
This screen displays the progress made while updating the printer's config-
uration. Upon completion of this operation, the Total Transfer bar reach-
es 100%, and you return to the Main Menu.

Save Defaults to Printer

Click Save to Printer on the Main Menu to load the default configuration
file, DEFAULT.PCF, and save it to the printer. This combines the opera-
tions of the [from file], the selection of the DEFAULT.PCF file, and the
[to printer] into a single button. The following message appears stating
that the working configuration is overwritten. Click Cancel to return to
the Main Menu without loading the default configuration file.
6820 Series 80-Column Printer User's Manual 47