Intermec 6820 Series User Manual page 103

6820 Series 80-Column Printer User's Manual
For the character value 127 (7Fh):
S When the default SBCS codepage is selected, a space is printed
S When other SBCS codepages are selected, the character associated with
the codepage is printed.
For character values from 128 to 255 (80h–FFh), the FX-86e Epson Char-
acter Graphics set is printed.
Disable Printing of Character Graphics
The printing of character graphics is disabled. Factory default disables this
function.
Format
Decimal
27 116 0
Print Character Graphics
This function allows printing of character graphics from the currently se-
lected SBCS codepage, by sending a graphics string to the printer. The val-
ues of the graphics data bytes can range between 0–255.
Format
Decimal
27 43 n d1 ... dn
where n is the length of the character graphic string and d1 ... dn are the
character graphics data stream.
The number of data bytes must be equal to the value of the variable n. The
range of values (for the characters in each graphics data byte): 0–255
For character values from 0 to 31 (00h–1Fh):
S When the default SBCS codepage is selected, the FX-86e IBM character
graphics symbol set is printed.
S When other SBCS codepages are selected, currently selected single byte
codepage character graphics are printed.
For character values from 32 to 126 (20h–7Eh):
S When the default SBCS codepage is selected, the selected international
character set is printed.
S When other SBCS codepages are selected, the character from the cur-
rently selected codepage are printed.
For the character value 127 (7Fh):
S When the default SBCS codepage is selected, a space is printed
S When other SBCS codepages are selected, the character graphics symbol
is printed.
Chapter 5
Hex
1B 74 00
Hex
1B 2B n d1 ... dn
—
Control Code Definitions
ASCII
ESC "t" (0)
ASCII
ESC "+" n d1 ... dn
87