Default Printer Settings; Error Messages - Intermec 6820 Series User Manual

6820 Series 80-Column Printer User's Manual
Chapter 4
S The Include program control update box determines whether to in-
clude the printer control program when updating the printer. Check
this box to update the setting and include the control program the next
time you update the printer configuration.
Generally, you only need to update the control program as new versions
become available. The control program is named NPFL6820.MOD.

Default Printer Settings

The following settings are the defaults for your 6820 Printer:
Zero Print Option
Autofeed Configuration
Protocol
Parity
Bit Rate
For other printer defaults, refer to the Printer Defaults paragraph in Appen-
dix B, "Cross-Reference Tables."

Error Messages

There are three cases where the computer may not connect to the printer.
Here are the three cases and error messages. Note that "x" indicates the
number assigned to the COM Port in question.
—
Using the 6820 Printer Configuration Utility
Print zeros without a slash
CR (carriage return at end of line without line feed)
NPCP
N/A (for NPCP)
19.2K (19200)
59