Control Panel - Intermec 6820 Series User Manual

Control Panel

6820 Series 80-Column Printer User's Manual
The printer control panel has four indicators in the top row and three but-
tons in the bottom row. Three indicators blink when there is a problem.
The three buttons adjust and align the paper.
Indicators
PAPER OUT The printer is out of paper.
HEAD JAM The print head is jammed and cannot move.
LOW BATT The internal battery voltage, the vehicle battery voltage, or the power
module voltage is too low.
Power This stays lit while the printer is in active mode, or awake. When the
printer is in sleep mode, or without power, this is dark.
Buttons
FORM FEED Press this button to feed the paper into the printer mechanism or
when the printer should advance to the next form. If the printer ran
out of paper, press this button to initiate automatic paper loading.
SET PAGE Press this button to signal the beginning of the page to the printer
after you have made the appropriate paper adjustments; or to set the
linefeed counter to zero and move the print head to its home posi-
tion. In "Paper Out" conditions, press this button to clear the Paper Out
error before printing can resume.
LINE FEED Press this button to adjust the top of the paper to the next line.
HEAD JAM
PAPER OUT
FORM FEED
Chapter 1
LOW BATT
Power
SET PAGE
—
Introduction
LINE FEED
5