About The Printers - Intermec 6820 Series User Manual

—
Chapter 1 Introduction

About the Printers

2
S Fixed Mount Printer
The fixed mount printer is mounted in motor vehicles or used in a
settlement room. The terminal holder may be mounted on the printer
or a remote dock can connect to the side of the printer. A deep paper
tray, which holds up to 200 3-ply forms (about 2" or 5 cm thick) is un-
der the printer mechanism.
S Portable Printer
The portable printer has a handle so that you can carry it. An optional
internal battery permits operation without the use of an external power
source. The terminal holder is an integral part of this printer. A shallow
paper tray, which holds up to 50 3-ply forms (about an inch or 2.5
centimeters thick) is under the printer mechanism.
S Wall Mount Printer
The wall mount printer hangs on a mounting plate secured to a wall.
Computers communicate with this printer through the remote terminal
holder, remote dock, or vehicle dock. With no internal paper tray, pa-
per is loaded from a separate paper tray (holds up to 2.5" or 6 cm of pa-
per) or a box. The printer mechanism is permanently attached.
Wall Mount Printer
(with mounting plate and flat paper tray)
Fixed Mount Printer
(with 4000 Series/62XX Terminal Holder)
6820 Series 80-Column Printer User's Manual
Portable Printer
(with 61XX Terminal Holder)