Intermec 6820 Series User Manual page 59

—
Chapter 4 Using the 6820 Printer Configuration Utility
When Save is clicked, and there is enough space in printer flash memory
for the fonts in the Fonts Selected list, the working configuration is up-
dated with the selected fonts. The amount of printer flash memory to
spare, after being loaded with the selected fonts, is shown (in kilobytes) in
the Space box. As long as this number is not negative, there is enough
space for the selected fonts.
However, if you attempt to save fonts and there is not enough space in
printer flash memory, the following error message is displayed. Click OK
to return to the Font Selection window and delete fonts in the Fonts Se-
lected list.
Canceling the Operation
Click Cancel to return to the Main Menu without making any changes. If
you have not made any changes to the Fonts Selected list, you return to
the Main Menu.
However, if you have already made some changes to the Fonts Selected
list, a confirmation message appears, similar to that shown below. Click
OK to return to the Main Menu with changes made to the Fonts Selected
list discarded. Click Cancel to remain in the Font Selection window.
6820 Series 80-Column Printer User's Manual 43